Graffiti Removal from Plastic and PVC

Plastic and PVC surfaces require some of the most careful cleaning solution selection in graffiti removal — because the wrong product can cause permanent damage that’s impossible to reverse.

Plastic and PVC appear across signage, playground equipment, truck curtains, and building products. Many common solvents will react badly with these materials — causing crazing, clouding, or surface softening that can make a perspex panel or printed substrate permanently unusable.

These surfaces should never be treated with general-purpose cleaners or DIY methods.

How We Remove Graffiti from Plastic and PVC

All graffiti removal from plastic and PVC surfaces is carried out by hand which gives our technicians full control over the process and minimises the risk of surface damage.

How we treat it:

1. Surface assessment
On arrival, the technician identifies the specific plastic or PVC material involved and assesses the graffiti type. This is essential — different plastics respond differently to cleaning cleaning solutions, and the wrong choice can cause immediate and irreversible damage.

2. Specialist cleaning solution
A carefully selected, gentle graffiti cleaning solution compatible with the specific material is applied by hand. The solution is worked carefully into the affected area to break down the graffiti without reacting with the surface beneath.

3. Careful hand removal
The graffiti is removed by hand using appropriate tools and technique. Abrasive materials are never used on plastic or PVC — even mild abrasives can introduce fine scratches that permanently affect clarity and appearance.

4. Neutralising treatment
Once the graffiti has been removed, a neutralising solution is applied to the surface. This stops any residual cleaning solution activity and protects the material from ongoing degradation.

Surfaces We Treat

Rigid Plastics:

  • Perspex and acrylic panels
  • Polycarbonate sheeting
  • Playground equipment
  • Signage substrates and face panels
  • Bus shelter glazing
  • Roofing and skylight panels

PVC

  • Truck curtain sides
  • PVC fencing and gates
  • Fascia boards and building products

What to Expect

  • Hand application — pressure washing is rarely on plastic or PVC surfaces
  • Careful material identification on arrival — product selection is always matched to the specific plastic or PVC involved
  • Gentle, compatible cleaning solutions that won’t cause crazing, clouding, or discolouration
  • No abrasive materials — clarity and surface finish are protected throughout
  • Neutralising treatment applied after every job to protect the material from residual cleaning solution damage
  • $20 million public liability insurance covers every job

Act Quickly for the Best Result

Fresh graffiti on plastic and PVC is easier to remove and requires less aggressive treatment — reducing the risk to the surface. The longer graffiti is left to cure and bond to the material, the more treatment it requires, and the greater the risk of needing a more aggressive approach that could affect the surface.

Protect Your Plastic and PVC Surfaces

After removal, our technicians can advise on suitable protective coatings for plastic and PVC surfaces that create a barrier against future graffiti — making subsequent incidents quicker and safer to remove.