Advertising and Bill Poster Removal

Unauthorised bill posters are a common problem on building walls, fences, and construction hoardings — and it’s the glue, not the paper, that makes them a challenge to remove properly.

Unlike spray paint graffiti, bill posters are applied using a strong, fast-drying adhesive designed to bond firmly and withstand the elements.

Peeling the paper off is the easy part — what’s left behind is a stubborn glue residue that clings to the surface, attracts dirt, and provides a ready base for the next round of posters to stick to even more firmly.

How We Remove Bill Posters and Adhesive Residue

The approach varies depending on the surface, but the primary challenge is always the same — breaking down the adhesive bond and removing both the poster material and any residual glue cleanly.

Brick, Concrete, and Masonry Walls

Hot water pressure washing is our primary method on hard surfaces. The heat and pressure soften the adhesive, releasing both the poster and the glue residue from the surface. Where the adhesive is particularly heavy or stubborn, a specialist cleaning solution is applied first to break down the glue before pressure washing — making the removal process faster and more thorough.

Timber Hoardings

Timber construction hoardings require a more careful approach. Where the timber is in good, sound condition, hot water pressure washing can be effective — but pressure and temperature are carefully controlled to avoid raising the grain or damaging the timber surface.

Where the hoarding is in poorer condition, or where the adhesive is particularly resistant, a hand treatment process is used instead — applying a suitable cleaning solution carefully by hand to break down the glue without risking damage to the timber.

Surfaces We Treat

  • Brick and masonry walls
  • Concrete walls and panels
  • Rendered surfaces
  • Timber construction hoardings
  • Concrete block walls
  • Retaining walls

What to Expect

  • Hot water pressure washing as the primary removal method on hard surfaces
  • Specialist adhesive cleaning solutions applied where required for heavy or stubborn glue residue
  • Carefully controlled pressure and temperature on timber surfaces to avoid damage
  • Hand treatment available for more delicate or weathered timber hoardings
  • Full residue removal — we don’t consider the job done until both the poster material and adhesive residue are gone
  • $20 million public liability insurance covers every job
  • Waste water is captured as required in compliance with environmental regulations
  • Traffic and pedestrian management arranged where required for street-facing locations

Don’t Let It Build Up

Bill posters are rarely a one-off event. Locations that get hit once tend to get hit repeatedly — and the more layers of posters and glue that build up, the harder and more costly the removal becomes. Staying on top of it quickly is always the most cost-effective approach.

For properties and councils dealing with repeat bill posting, a maintenance agreement with regular inspections and rapid response is the most practical solution.

Protect Your Walls from Future Posters

If your property is a repeat target, it’s worth asking our team about protective coating options. There are specialist anti-poster coatings available that are specifically formulated to reduce the ability of adhesives to bond to wall surfaces — making future poster removal quicker and easier.

These are different to standard anti-graffiti coatings and are worth discussing based on your specific situation.